March 24, 2024
Fix Your LG TV Remote Issues

7 Easy Steps to Fix Your LG TV Remote Issues

Fix Your LG TV Remote Issues
Fix Your LG TV Remote Issues

TV remotes often stop functioning properly, even if you use them normally. This is because they are not very durable or reliable!

If your LG TV remote is giving you trouble, don’t panic – it’s a very common issue Fix Your LG TV Remote Issues. But before you decide to buy a new remote, try all of the solutions I’ve listed below.

I’m sure most of you will be able to Fix Your LG TV Remote Issues easily with these tips!

Fix Your LG TV Remote Issues

Sometimes, your LG TV remote might stop working, even if you don’t abuse it. This is because they are not made very well! If you are facing this problem, don’t fret Fix Your LG TV Remote Issues- it’s a very common one. I’m confident that most of you will be able to restore your remote with these tricks!

Restart your LG TV

Restart your LG TV A simple way to Fix Your LG TV Remote Issues is to restart your television (turn it off, then on again).

Fix Your LG TV Remote Issues
Fix Your LG TV Remote Issues

I know, it sounds too simple. Maybe even a bit ridiculous. But just trust me.

First, you need to unplug your LG TV from its power source (wall socket or power-surge protector).

Restart LG TV

Then, press and hold the power button on your TV for about 30 seconds. This step helps to completely empty your TV of any leftover electricity stored in various parts of the device.

After the 30 seconds are over, you can let go of the power button and then wait another 30 seconds.

Finally, you can plug your LG TV back in and check your LG remote to see if it’s working. If it is, awesome! If not, keep reading.

Hold the power button while removing the batteries from the remote

Drain the power from your remote and press the power button repeatedly If restarting your TV didn’t solve the problem, I’m almost sure this next fix will Fix Your LG TV Remote Issues.

You need to open the back cover of your remote and take out the batteries.

While the batteries are out, press the power button on your LG remote for about 30 seconds. Then follow that up by pressing and releasing the power button about 10 times quickly.

drain power from the LG TV remote The reason for this is similar to what I explained above when I asked you to restart your TV – pressing the power button helps get rid of any extra power from your LG remote.

Your remote won’t reset properly if its parts are full of excess electricity! After you’re done pressing the power button, you can put back your remote batteries and check if your LG remote works now.

This simple reset should restore your remote! (Fix Your LG TV Remote Issues)

Put fresh batteries in

Just to make sure, I also want you to put in a new pair of batteries in your remote. Put in new LG remote batteries. If I got a dollar every time by simply putting in new, fresh batteries and fixing a remote, I’d have 23 dollars.

Fix Your LG TV Remote Issues

So please do this for me and put in new batteries for your LG remote. At worst, you’ve eliminated dead batteries as the reason for the problem, and you won’t have to change your remote batteries for a long time.

Push each button on the LG remote control

If you have tried restarting both your TV and your remote and changing the batteries and your LG remote still won’t work, it’s time to try something different. Trust me on this one! These fixes may seem a bit strange, but they are proven to WORK.

I want you to try pressing all the buttons on your remote. Odd, I know. But do it. Press buttons on lg TV remote. In many cases, buttons on your remote simply get jammed, giving the impression that your remote isn’t working. Maybe some dirt, liquid, dust, food, etc. got stuck between the buttons and the remote, causing them to jam. (Fix Your LG TV Remote Issues)

By pressing every button on your remote many times, over and over, you’ll hopefully loosen any debris.

NOTE: I suggest facing your remote upside down while you’re repeatedly pressing every button, so potential debris can more easily fall out.

Get rid of anything that might be in the way of IR transmissions

Clear the path between your remote and your TV’s IR sensor At this point my guess is either your remote is broken, OR something is preventing your LG remote from talking to your TV.

Obstacles are a very common problem that people often don’t realize are happening.

Your LG remote has an infrared light that sends a signal to the infrared receiver on your LG TV. If anything blocks this signal, your remote won’t work.

Possible blockages/interferences include furniture, sound bars/speakers, decorations, pillows, other electronics, etc.

So just make sure that your remote has a free and direct line to your TV’s IR sensor. If something “might” be blocking it, move it. Or you can try using your remote from a different angle by sitting in a different seat.

Verify the LG remote’s IR sensor is functional

Test your LG remote’s infrared receiver Your LG remote’s infrared receiver is the part that sends the signal to your TV. Sometimes, this part stops working properly.

If the IR receiver on your remote is damaged and not working, your remote simply won’t work. No signal will reach your TV!

Fortunately, it’s easy to check your remote’s IR receiver. Just take out your smartphone and open the camera app.

Point the camera at your remote so that you see the top of your remote on your phone. Then press any button on your LG remote.

If your remote’s IR receiver is working fine, you should see a blinking light through your smartphone camera. If you don’t see a light or blink, your remote IR receiver is broken.

check the IR receiver on the LG remote using the smartphone camera And we know it’s not just a matter of dead batteries because you already changed those!

Disassemble your remote and clean the components

As the platitude goes, in the event that you don’t attempt, you won’t ever succeed. So in the event that you’re in the state of mind for a Do-It-Yourself project and won’t hesitate to take care of business, here’s a bit-by-bit guide on the most proficient method to clean your LG controller:

  • Get the right devices: Before you open up your remote, ensure you have the right apparatuses to finish the work. These ought to incorporate a bunch of little screwdrivers, a plastic pry device, and a little container of scouring liquor.
  • Open up your remote: Get by prying going the back front of your remote with the plastic pry apparatus. Be mindful so as not to harm the plastic, and ensure the prying device isn’t excessively sharp to try not to scratch the remote’s case.
  • Eliminate the battery: After you have gotten to the battery compartment, eliminate the battery with the assistance of a little screwdriver. This is to stay away from any inadvertent shortcircuits and electric shocks.
  • Clean the inner parts: Utilize a Q-tip absorbed scouring liquor and tenderly rub the impacted regions. This ought to eliminate any soil, dust, or different deposits that might be causing the issue.
  • Reassemble the remote: Since you have cleaned the inward parts, reassemble the remote by returning all that to its unique position. Cautiously press the back cover once again into the right spot.
  • Test the remote: Turn the remote on and test every one of the buttons to guarantee the cleaning system is effective.

That is all there is to it! By wiping out any soil or buildup from your remote, you ought to have the option to reestablish it to its unique usefulness. If not, it very well might be an ideal opportunity to think about looking for a substitution.

To summarize, if your LG remote isn’t working with your TV, you should start by power-cycling your TV by unplugging it from the wall outlet for 30 seconds and then plugging it back in. If that doesn’t work, try removing the batteries from your remote and holding down the power button for five seconds to reset it.

If this doesn’t work, replace your remote’s batteries with a new pair. Try mashing all the buttons on your LG remote to ensure they’re all working. Finally, remove any potential objects blocking your remote or television’s IR sensors.

If none of these fixes work, it’s time to open up your LG remote and clean its internal hardware. It’s a simple Fix Your LG TV Remote Issues that only takes a few minutes and could Fix Your LG TV Remote Issues.

Why Is LG TV Not Connecting to WiFi?

However, please note that if you’re not experienced with DIY electronics repairs, it’s best to contact experts for advice or have the remote repaired by professionals. Finally, don’t forget to take your remote apart carefully to avoid damaging the hardware and to properly reassemble it. By following these steps, you should be able to get your LG remote working again in no time!

Why is my LG TV remote not working? 

There could be several reasons why your LG TV remote is not working, Fix Your LG TV Remote Issues such as dead batteries, stuck buttons, a blocked IR sensor, or a damaged IR receiver. You can try some of the fixes mentioned in this article to troubleshoot and solve the problem.

How do I reset my LG TV remote? 

You can reset your LG TV remote by removing the batteries and pressing the power button for about 30 seconds. Then press and release the power button about 10 times quickly. This will help drain any excess power from your remote. Then put back the batteries and test your remote.

How do I check if my LG TV remote’s IR sensor is working?

You can check if your LG TV remote’s IR sensor is working by using your smartphone camera. Point the camera at the top of your remote and press any button. If you see a flashing light through your camera, your IR sensor is working fine. If you don’t see any light, your IR sensor is broken.

How do I fix a stuck button on my LG TV remote? 

You can Fix Your LG TV Remote Issues by pressing all the buttons on your remote many times, over and over. This will help loosen any debris that might be causing the buttons to jam. You can also face your remote upside down while doing this so that any debris can fall out.

How do I clear the path between my LG TV remote and my TV’s IR sensor? 

You can clear the path between your LG TV remote and your TV’s IR sensor by removing any possible obstructions or interferences that might be blocking the signal. These could include furniture, sound bars/speakers, decorations, pillows, other electronics, etc. You can also try using your remote from a different angle by sitting in a different seat.

Leave a Reply

Your email address will not be published. Required fields are marked *