You have a Samsung TV that is dim – the backlight is functioning and “on,” but it’s dim! This can be very annoying, especially when it occurs on a new TV.
Fortunately, it’s usually only a short-term issue – I’ve discovered several effective Secret to Brightening Your Samsung TV. If you attempt each and every one of these solutions, I am very sure one of them Secret to Brightening Your Samsung TV will work for you.
Secret to Brightening Your Samsung TV
Turn off your Samsung television and stand by 60 seconds to reset it assuming the screen is dim. Secret to Brightening Your Samsung TV Keep the power button pushed for 30 seconds while turning off the television. Following 60 seconds, reconnect your Samsung television.
Remove the Samsung TV from the wall
This solution may seem simple, but disconnecting your Samsung TV from the power source is the most common Secret to Brightening Your Samsung TV.
Disconnect Samsung TV from the power source The important thing here is to wait for the WHOLE minute. Be a little patient and make sure it has been at least 60 seconds before reconnecting it.
While the TV is disconnected, locate and press the power button on your Samsung TV for half a minute. Make sure you are pressing the power button on your TV, and not your remote!
This will help remove any leftover power in the TV and let the TV soft reset itself. This is different than just turning the remote control on and off!
When you reconnect the TV after a minute, you should see it turn on with no issue and your screen should be bright again!
Samsung Picture Settings Reset
A different potential Secret to Brightening Your Samsung TV here is to reset your Samsung TV Picture Settings. This will restore your screen settings to the original ones.
To reset your Samsung TV Picture Settings:
Press Home on your Samsung remote Choose Settings. Choose Picture Go down to Expert Settings At the bottom, choose Reset Picture Confirm by choosing Yes
Disable the Energy Saving Mode
If your screen is still dark, you need to check if you have Energy Saving Mode enabled.
Energy Saving Mode automatically changes the brightness of your TV to lower the amount of power it uses. Sometimes this feature is the reason for the darkness you’re seeing on the screen.
To be sure, let’s turn Energy Saving Mode OFF. Follow these steps:
Press Home on your Samsung remote Choose Settings Go down to General Choose Eco Solution Choose Energy Saving Mode. Press Enter on the remote to turn it OFF. Samsung-tv-energy-saving-mode-off
NOTE: On some Samsung TV models, Energy Saving Mode is named “Power Saving Mode”
If your device is older, navigate to Settings > General > Eco Solution > Ambient Light Detection. Samsung-tv-ambient-light-detection-off
Change the Minimum Backlight setting on your screen
If disabling Energy Saving Mode (or Ambient Light Detection) did not solve your problem, I’d suggest changing the “Minimum Backlight” setting of your Samsung TV.
This Secret to Brightening Your Samsung TV of the light source for your screen, and sometimes, it’s this very knob that needs to be changed in order to make your TV brighter!
To change the Minimum Backlight brightness on your Samsung TV, follow these steps:
Press Home on your Samsung remote and then choose Settings Go down to General Choose Eco Solution Choose Minimum Backlight Adjust the scale and see if the darkness disappears NOTE: On some Samsung TV models, Energy Saving Mode is named “Power Saving Mode”
If you have an older model, try going to Settings > General > Eco Solution > Minimum Backlight.
Samsung TV OS should be updated
Your Samsung television might have a ton of issues on the off chance that the product is obsolete. You should simply look for the most recent firmware update for your television model. Generally, these updates happen naturally, however once in a while, they get skipped.
This is how it’s done:
Go to Settings Pick Backing Pick Programming Update Pick the Update Programming Your television will refresh itself naturally. This interaction might require some investment, however, your television will let you know when it’s done.
Update Samsung television programming. Your television will currently naturally search for any new updates. Assuming there is one, your television will introduce it to you.
You’ll need to ensure you update your Samsung television consistently to remain refreshed with the most recent programming!
Samsung TV reset to factory settings
If your dark screen issues persist after updating the OS, you need to do a complete factory reset. (Secret to Brightening Your Samsung TV)
While the TV is turned on, push the Home button on your remote. Choose Settings Choose General Choose Reset Then type in your security PIN (“0000” if you never set one). Your TV will turn off and on again and then show the initial setup screen. This will basically reset your Samsung TV to the settings it had when you bought the television.
(If you have an older Samsung TV, the factory reset steps are slightly different from what’s above)
Samsung TV factory reset without a remote
You can still factory reset your Samsung TV even if you don’t have your TV’s remote for some reason. To do this, locate the power button on your TV. It may be on the right-hand side, left-hand side, or very bottom of the device depending on the model you have.
With the TV on, press the Menu button on the TV and then switch to Settings > General > Reset. If you can’t find these buttons on your TV, or if your TV is in a tight spot, there are other options.
First, think about connecting a USB keyboard directly to the back of your Samsung TV. The keyboard can then be used to navigate and reset your TV.
Another option, if you have a Samsung Smart TV, is to install the Samsung SmartThings app on your smartphone. After linking your TV to the app, you can use your smartphone as a remote!
A final option is to use a universal remote you have around and type in the correct Samsung code for the remote to make it work.
You should have solved your power issues by now but just in case you haven’t, I’ve added some extra steps worth trying before giving up.
P.W.M. (pulse width modulation) should be set to 100
You may not be familiar with “pulse with modulation” before, but it’s a setting that automatically adjusts the brightness output levels of your TV based on the scenes of the movie/show.
Sometimes these P.W.M. settings are the reason for your TV being too dark. To modify these settings, you’ll have to access your Samsung TV’s Service Mode. With the TV off, take your remote and select Mute, 1, 8, 2, and then Power.
Before changing anything, you should take a picture of the settings you see. Once these settings are modified, there is no way to “restore” them back. So just to be careful, take a picture.
Once the Service Menu shows up you’ll begin by selecting SVC > Other Setting > CAL Data Restore > OK. Then go back to the first menu by pressing Return on your remote go down to Advanced and press “0” 4 times on your remote. This will show up more menu options.
Go to Picture_2D > SubSetting. From here turn all the P.W.M. up to 100 parameters (in total). By making them all 100, your TV should now stay at one brightness level and shouldn’t change based on the scene.
Possible problem with Samsung TV backlight
You may have a faulty LED power strip on the backlight if your Samsung TV is on (the power light is green and you hear sound), but the picture on the screen is dark.
To diagnose the issue, make sure the TV is on, and then use a flashlight (the flashlight on your phone will do too) and shine it near the TV’s screen. I recommend turning off all the lights so it’s easier to see.
If the screen is operational, you will notice a very dim image on the television. Check if the Samsung TV backlight is broken Use the remote to see if the TV reacts to commands. I recommend testing the volume and input keys on the remote too.
You may have to move the light around to locate where the TV’s user interface is on the screen. If you hear sound cues, you’ll probably see a dim image too. If you see a faint image when you shine a flashlight on the screen, and the remote lets you control the TV, that’s good news. It means the TV’s T-CON and mainboard are functioning as they should.
In that case, the issue is most likely with the TV’s LED backlights.
NOTE: While some of a TV’s components are simple and cheap to replace by yourself, taking apart a TV will likely void the warranty. If your TV is still under warranty, I suggest contacting Samsung for more help.
Having said that, some easy Secret to Brightening Your Samsung TV, and you won’t have to pay much for technicians or repairs. I discuss some of the components that are most likely to cause the black screen of death in a previous article.
There’s also a possibility that the whole panel is broken and buying a new screen is expensive and usually not worth it. Buying a new TV is often cheaper than paying for a panel replacement. But it’s uncommon for a TV’s panel to break unless it’s been damaged by force.
The 9 Mystery of Samsung TV Turning On Automatically Revealed!
Support and Warranty for Samsung Televisions
Samsung TV support If you followed all the steps above and your Samsung TV is still dim, you should get in touch with the Samsung TV support team directly.
You can call them at 1-800-SAMSUNG (726-7864)
Samsung Care Pro is available from 8 a.m. to 12 a.m. EST, seven days a week. They have different service options, from in-home service to mail-in options. (Secret to Brightening Your Samsung TV)The price for this service will depend on the final result and whether or not the work is under warranty.
But the good thing is you’ll have a qualified Samsung technician to examine it. Samsung TV warranty You can also check online to see if your TV has Samsung’s warranty. Sadly Samsung TV warranties usually only last 1 year. Still worth a try. (Secret to Brightening Your Samsung TV)