Get Your Ethernet Back On Track with 9 Easy Helpful Tips

Using ethernet instead of a WiFi connection has its advantages. Internet connections made using wired connections are more dependable and secure Get Your Ethernet Back On Track.

But sometimes, your ethernet may fail to work for no obvious reason while your WiFi keeps working fine.

Get Your Ethernet Back On Track

If your ethernet is functioning properly but your WiFi is not, the problem could be with your connections, network cables, drivers, outdated network configurations, unplugged wires, or malware. Check your connections, reboot your router/modem, and look for any damage on the Ethernet wire as a solution to this issue and Get Your Ethernet Back On Track.

In order to help you quickly go online, I’ve listed below each of these probable problems in detail along with remedies.

Why does my WiFi work but my Ethernet doesn’t?

Ethernet issues can range from a loose cable to incorrect wire connections. Regardless of how serious the issue is, most ethernet problems can be solved.

The most typical ethernet problems are listed here along with solutions.

First Issue: Disconnected

A disabled network connection might be the cause of your ethernet not working. It might have been disabled by you or someone else on purpose or by accident.

A disabled connection might also be due to a malfunctioning network adapter or damaged drivers. In any case, your ethernet will not work if the network is disabled.

Solution Fixing a disabled connection is not hard. However, you need to verify if your ethernet is disabled in the first place by checking your network status.

You can check the status of your connection using these steps:

Go to Settings Click “Network & Internet” and Click “Status” to see if you’re connected If not connected, click on “Change adapter options.” Right-click on ethernet and select enable

Close the window and restart your computer to enable ethernet. (Get Your Ethernet Back On Track )

Second Issue: Disconnected Ethernet cable

your ethernet might not be working because someone yanked out the cable from the router or PC. It’s a common occurrence, and it’s one of the causes of a poor connection.

Other times, you might have connected the cable, but maybe wrongly.

Solution Inspect the ethernet cable on both sides to make sure it is not loose.

I would recommend disconnecting and then reconnecting the cable to make sure it is securely in place in both the router and your device.

Third Issue: Ineffective Ethernet cable

A broken or defective cable might be another reason why your ethernet is not working properly. You might have connected the ethernet cable right but still can’t get a connection.

To verify if this is the problem, go to network settings to check the status of your connection.

If the status page shows “network cable unplugged,” but the cable is securely in place on both sides, you might have a defective ethernet cable.

Solution The simplest way to fix a defective ethernet cable is to get a new one.

Or, you can fix it by using a method called splicing, which means cutting out the damaged part and joining the remaining parts to make the cable work again.

Fourth Issue: Curly Cable

Your ethernet connection might fail because of a twisted cable. A curve along the ethernet cable can harm the wires inside or disrupt data transfer, causing connection issues.

Solution Ensure the cable is flat with no curves or twists. Also, keep the ethernet cable away from other wires to avoid electromagnetic interference.

Think about keeping the channel length below 300 feet to lower the risk of the cable getting tangled.

Fifth Issue: Unreliable Ethernet Ports

Your ethernet cable might be fine, but the ports on your device might be broken. As you might know, you can’t get a connection with damaged ports.

The problem might be on your router, modem, PC, or any other compatible device. Inspect the ports on these devices to see if they are okay with no physical damage.

Solution Ethernet routers and modems have multiple ports. The good news is that not all ports can be broken at the same time. If none of them are working, your router might be the problem.

Try connecting the cable to a different port to see if the previous one is broken. If you get a connection, you might have to fix the broken port to use it again.

Sixth Issue: faulty or outdated Ethernet drivers

Like any other device in a computer, you need to install the right drivers for your ethernet adapter to use it. Luckily, most PC devices are plug-and-play, meaning they have drivers that install by themselves with no extra setup needed.

However, installed drivers can get old or damaged because of software issues. If this happens, your ethernet might not work, and you might have to update your drivers to the newest version.

Solution To update your ethernet drivers: (Get Your Ethernet Back On Track.)

Go to Device Manager on your PC Go to “Network Adapters” Right-click on ethernet and choose “update driver” Pick “Search automatically for updated driver software” Or, pick “Browse my computer for driver software” if you have the newest drivers in a USB flash drive, CD, or hard drive.

Seventh Issue: Viruses and Spyware

Sometimes spyware and viruses might cause your ethernet to cease functioning while your WiFi continues to function.

Software powers your router. It is susceptible to malware attacks because of this. If this occurs, the spyware will slow down or entirely disconnect your internet connection.

Solution Installing an internet antivirus tool on your computer is the best approach to safeguard your home network against viruses and malware.

Your ethernet connection can be restored after a decent antivirus has helped you find and remove all varieties of malware and viruses from your computer Get Your Ethernet Back On Track.

Eighth Issue: Mistaken Wire Terminations

If you examine the clear RJ-45 plug of your ethernet cable, you’ll see that it has several colored wires. These wires use a specific wiring scheme to create a connection.

If the wires are terminated wrongly, your Ethernet cable will not work as you want.

ethernet wire termination

There are two wiring schemes to choose from; T568A and T568B.

T568A – Green Stripe, Green, Orange Stripe, Blue, Blue Stripe, Orange, Brown Stripe, Brown.

T568B – Green Stripe, Blue Stripe, Green, Brown Stripe, Brown, Orange Stripe, Orange, Green Stripe, Blue Stripe.

Solution Inspect the cable to make sure the wires use either of the two wiring schemes. Also, make sure the colored wires end correctly at the tip of the plug. (Get Your Ethernet Back On Track)

You might have to take out the plug and crimp the wires again properly if you find any errors. Or, you can get a new Ethernet cable.

Ninth Issue: Operating System

The kind of OS you are using might make your ethernet stop working suddenly.

Some operating systems have built-in Firewalls and security models that block incoming and outgoing connections.

Sometimes, your OS might be using old, outdated drivers, causing software and hardware conflicts.

Solution You can fix OS issues by formatting your computer or reinstalling the Operating System.

You might also think about updating your OS to the newest version to help fix several issues, including ethernet problems.

If the problem is Firewall-related, you might have to turn it off to let your ethernet get a connection.

Other Ways to Get Your Ethernet Back On Track

Ethernet adapter reset

You can quickly restore your internet connection by restarting your ethernet adapter. Just adhere to these easy steps: (Get Your Ethernet Back On Track )

Access Settings Activate “Network & Internet” On the left, click “Status”. Click “Network Reset” after scrolling down. On the Network Reset Page, select “Reset Now” Connect to Ethernet if you can.

Activate the network troubleshooter

You can try using the network troubleshooter to fix your connection if the preceding suggestions don’t work. the following steps: (Get Your Ethernet Back On Track )

Access Settings Tap “Update & Security” “Troubleshoot” follows. “Internet Connections” will follow. Select “Run the Troubleshooter” and adhere to the on-screen directions. Click “finish,” then restart your computer.

Removing the Modem or Router

When in trouble, disconnect it! and try to Get Your Ethernet Back On Track.

Many ethernet issues can be fixed by simply disconnecting your router/modem and waiting a minute before reconnecting it and getting a connection.

Remember that it might take 2-3 minutes for your router/modem to fully restart.

Conclusion Ethernet connection problems can be annoying, no doubt. But by following the tips below, you can hopefully fix your issues and get back online quickly.

Exploring the best Causes of Nest No Power to RH Wire (E74 Error Message)

Check the status of your connection Check the ethernet cable on both sides to make sure it’s not loose Get a new or fix a broken ethernet cable Make sure the cable is flat with no curves or twists Connect the cable to a different port Update your ethernet drivers Install an Internet Antivirus program Make sure the wiring schemes and termination are correct Reinstall/update the Operating System Reset ethernet adapter Run network troubleshooter Disconnect the router/modem Best of luck and thanks for reading!